Your cart is currently empty!
IPS111-XX Viper Billet Hub Centric Wheel Spacer w/o External Hub
Viper 1/4″, 5/16″, & 3/8″ Thick Hub Centric Wheel Spacer – Fits all Dodge Vipers
CNC machined from aircraft 6061-T6 Aluminum, available in 1/4, 5/16, & 3/8″ thick, 6 X 4.50 bolt pattern.
All of our wheel spacers are hub centric, as they register on the bearing hub not the wheel studs. We have two versions of our wheel spacers ΒΌ” to 3/8″ which are too thin to support an external hub, and a spacer that has an external hub. As the Viper has a bearing surface that the spacers or wheel ride on, that is 3/8″ long, you can see there is no way to have an external hub the same size as the internal bore needed to fit on the bearing hub on any spacer less than 3/8″. Our wheel spacers with the external hub start at .420″ thick and go up from there to insure there is enough material to support the wheel and not be knocked off due to a thin web between the internal bore and external hub.
Sold as singles
$42.00
In StockDescription
Viper 1/4″, 5/16″, & 3/8″ Thick Hub Centric Wheel Spacer w/o External Hub – Fits all Dodge Vipers
CNC machined from aircraft 6061-T6 Aluminum, available in 1/4, 5/16, & 3/8″ thick, 6 X 4.50 bolt pattern.
All of our wheel spacers are hub centric, as they register on the bearing hub not the wheel studs. We have two versions of our wheel spacers ΒΌ” to 3/8″ which are too thin to support an external hub, and a spacer that has an external hub. As the Viper has a bearing surface that the spacers or wheel ride on that is 3/8″ long, you can see there is no way to have an external hub the same size as the internal bore needed to fit on the bearing hub on any spacer less than 3/8″. Our wheel spacers with the external hub start at .420″ thick and go up from there to insure there is enough material to support the wheel and not be knocked off due to a thin web between the internal bore and external hub.
(** Note: When using wheel spacers, you must use Extended Lug Nuts to make up for lost stud threads on spacer less than .420″ thick. Spacers over .420″ REQUIRE longer axle studs to be installed. **)
Wheel Spacers without external Hub
All of our wheel spacers are hub-centric by registering on the wheel hub not the wheel studs. Lug Nuts should be tightened in a pattern shown below and torque in 3 steps to help insure wheel centering when lug nuts are tight. “Note: Wheel Spacers fill a cosmetic purpose, not a performance modification. Some sanctioning bodies exclude wheel spacers from HPDE track or competition events.”
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 4 in |
| Thickness | 1/4" (.250), 5/16" (.3125), 3/8" (.375), Custom |
1 review for IPS111-XX Viper Billet Hub Centric Wheel Spacer w/o External Hub
You may also like…
-
Viper PartsIPS189 – Lug Nuts – Extended
Extended Lug Nuts to use with Spacer Plates
Custom lug nuts that extend into the wheel to gain back threads that were lost by adding spacer plates. 1/2-20 thread, 3/4 Hex. Available in Chrome or Black.Β
(MUST USE ANTI-SEIZE LUBRICANT or WD40 ON WHEEL STUDS TO HELP PREVENT THREAD GALLING (COLD WELDING OF THE THREADS)
Sold in Sets of 6
(0 reviews)$15.00 – $21.00 Select options
Related products
-
Viper Parts
IPS426 Short Throw Shifter 1992-2010 Vipers
The IPSCO Short Throw Shifter (STS), is designed to reduce the distance your hand needs to move to engage the next gear, thus reducing the amount of time spent shifting, reducing wasted time between shifts, and resulting in improved performance. We have decreased throw by reducing the angle that the shifter shaft travels through during its stroke between gears. IPSCO’s design changes the pivot point geometry of the short shifter from the stock factory shifter to reduce the distance that the upper section must travel to achieve the same degree of movement in the lower section where the shift rod engages. This ensures that although your hand is moving a shorter distance, the transmission is still fully engaged in every gear, and is carefully designed to create the optimal throw length, angular shift throw, and shift knob height. The design also includes springs to help users accurately move from gate to gate, to help prevent missed shifts and over revving of the engine on down shifts. The end result is a shorter, precise shift, which requires a shorter hand movement to engage the next gear, and looks and feels sportier.
(3 reviews)$410.00 Select options -
Viper Parts
IPS112-X Viper Billet Hub Centric Wheel Spacer with External Hub
Viper .420 Thick Hub Centric Wheel Spacer with External Hub for wheel registration – Fits all Dodge Vipers
CNC machined from aircraft 6061-T6 Aluminum, available in .420″ thick, 6 X 4.50 bolt pattern.
All of our wheel spacers are hub centric, as they register on the bearing hub not the wheel studs. These wheel spacers have an external hub for registering the wheel on andΒ insure there is enough material to support the wheel and not be knocked off due to a thin web between the internal bore and external hub.
Sold as singles, picture shows internal hub registration and external wheel registration
(0 reviews)$78.00 Select options -
Viper Parts
Spring Seat Lowering Caps 1996-2017 Vipers
GEN 2/3/4 Spring Lowering Caps, 1996-2010 Vipers
These Spring Lowering Caps are made from 6061 Aircraft Aluminum. Low profile spring caps are an easy way to lower the ride height by .65″ to .75″ by replacing the thick OEM spring caps. Does not change the ride comfort while lowering the fender gap.
GEN 5 Spring Lowering Cap, 2013-2017 Vipers
These Spring Lowering Caps are made from 6061 Aircraft Aluminum. Low profile spring caps are an easy way to lower the ride height by .375″ to .5″ by replacing the thick OEM spring caps. Does not change the ride comfort while lowering the fender gap.
(0 reviews)$150.00 – $211.00 Select options -
Viper Parts
IPS173-GEN 3 Billet Pulleys 03-06 Vipers
Gen 3Β Billet Pulleys 03-06 Vipers
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pullet with a replaceable Bearing.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new 5/16-18 Grade 8 mounting hardware.
(0 reviews)$72.00 – $185.00 Select options
Robert –
Hey Mark. I was out of town when my wheel spacers arrived, but when I got home I opened the box, and I have to tell you those are some superb examples of exceptional machined parts. Top quality and fit perfectly! Just wanted to let you know how pleased I am with them and I won’t hesitate to share my experience with my other car buddies.
Thanks again,
Robert Thornburgh