IPS173-GEN 3 Billet Pulleys 03-06 Vipers

Related products

• 

  • 
  • 
  • 

  Viper Parts

  IPS173-GEN 4/5 Billet Pulleys 08-17 Vipers

  Gen 4/5  Billet Pulleys 08-17 Vipers

  Idler Pulley

  Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.

  Belt Tensioner Pulley

  Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pullet with a replaceable Bearing.

  Under Drive Crank Pulley

  Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new M8 X 1.25 Grade 8 mounting hardware.

  (0 reviews)

  $72.00 – $185.00 Select options
• 

  Viper Parts

  IPS111-XX Viper Billet Hub Centric Wheel Spacer w/o External Hub

  Viper 1/4″, 5/16″, & 3/8″ Thick Hub Centric Wheel Spacer – Fits all Dodge Vipers

  CNC machined from aircraft 6061-T6 Aluminum, available in 1/4, 5/16, & 3/8″ thick, 6 X 4.50 bolt pattern.

  All of our wheel spacers are hub centric, as they register on the bearing hub not the wheel studs. We have two versions of our wheel spacers ¼” to 3/8″ which are too thin to support an external hub, and a spacer that has an external hub. As the Viper has a bearing surface that the spacers or wheel ride on, that is 3/8″ long, you can see there is no way to have an external hub the same size as the internal bore needed to fit on the bearing hub on any spacer less than 3/8″. Our wheel spacers with the external hub start at .420″ thick and go up from there to insure there is enough material to support the wheel and not be knocked off due to a thin web between the internal bore and external hub.

  Sold as singles

  Rated 5.00 out of 5

  (1 review)

  $42.00 Select options
• 

  • 
  • 
  • 

  Viper Parts

  Front Removable Tow Hook Kits 2003-2010 Vipers

  Front Removable Tow Hook Kit, 2003-2010, Gen 3/4 Vipers

  This Tow Hook kit is made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car. Also available are SCCA approved (which does not stick out in front of the bumper fascia) and a flex ring versions.

  Note: If you have an intercooler this Tow Hook will not fit.

  (0 reviews)

  $198.00 – $230.00 Select options
• 

  • 
  • 
  • 

  Viper Parts

  IPS162X Rear Tow Hook Kits – 2003-2017 Vipers, Non ACR Extreme & GTS-R

  Rear Tow Hook Kits,  Gen 3,4 & 5 (2003-2017), Vipers, Non ACR Extreme & GTS-R

  This Tow Hook kit is made from 1018 Steel, and Black Powder Coated. Bolts to the right or left rear frame rail with Grade 8 Hardware included.The complete kit installation can be done in less than 15 minutes.

   

  (0 reviews)

  $70.00 – $141.00 Select options