Your cart is currently empty!
Shop
Showing 22–42 of 57 results
-
Pantera Parts
IPS128 Pantera Steering Rack Bushing
Steering Rack Bushing
This bushing replaces the stock plastic sleeve on the passenger side of the steering rack. Made from Bronze for long life.
(0 reviews) -
Pantera Parts
IPS130 Billet ZF Lower Cover Plate
Billet ZF Cover Plate
CNC machined from 6061-T6 Aluminum, This plate is a direct replacement for the factory cast aluminum cover plate. So you can add a little dressed up look while adding a much stronger plate to reduce housing flex.
(0 reviews) -
Viper Parts
IPS139-X Shift Knob adapter
This adapter can be used to allow the use of many after market knob available from your local auto part dealers. Make from 303 Stainless Steel adapts from 1/2″-20 Female therad to 1/2″-20 Male thread, with boot groove.
(0 reviews)$39.00 – $42.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS13X Shifter Knob Lowering Kit 92-17 Vipers
Viper Shifter Knob Lowering Kits
Direct bolt-in and will work with the stock factory knob, or an aftermarket shifter knob using 1/2-20 UNF threads. These lowering kits replace the factory black isolator and come in two versions 1″ or 2″ lowering kits.
Youtube Install Video : https://www.youtube.com/watch?v=VZHgzXROSEs Thanks to Life at Speed
(0 reviews)$41.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS143X Seat Lowering Kit Fixed 2″ – 03-10 Vipers
Seat Lowering Kit – Fixed 2″Â 03-10 Vipers
This fixed seat lowering kit lowers the 03-10 SRT seat a full 2 inches, allowing extra knee room and headroom for even the tallest Viper driver. The seat will no longer slide forward or backwards, but the seat back can be tilted.
This is a custom made part, lead time is one week.
2008-2010 owners *** IMPORTANT AIRBAG FACTS ***
Decision regarding seat lowering and air bag operation for both seats on 08-10 SRT10 Vipers.
Both passenger seats have a new system in the Viper that will correctly determine the weight of an occupant and adjust the airbag to on or off. It has some criteria to be met though as it is MUCH more advanced than any system has been before it.
Between 65 and 105 pounds the system will determine the need for the airbag at all. This will be based on a correctly seated person! This is true for all the levels of adjustment. You must sit in the seat correctly and distribute your weight evenly in the seat without leaning for/aft or side to side. Within seconds after starting the car the system will “lock in” your values. If this is not done correctly and the light is incorrect for your weight it is best to exit the running vehicle and wait 2-6 minutes before re entering the vehicle. At 2 minutes the corrected value is 80% and as the minutes increase to 6 minutes the corrected percentage gets closer to 100. The system also monitors and updates your weight and “position” in the vehicle every 2 minutes after that.
At 120+ pounds the airbag will still be monitored by the system but will be in the ON mode. It is still critical that your weight is evenly distributed though as it senses this every 2 minutes.
This all being said if you install the seat lowering kit you will need to do the following:
Both seats have a position sensor located under the seat, that controls the air bag by proximity to the steering wheel for force adjustment.
If the seat is lowered and the switch is not installed correctly the force of the airbag is unknown but it WILL still deploy if the conditions are met for it. The seat position sensor (a metal proximity sensor), will need to be adjacent to metal when the seat is from midway to the far back position, so you will need to zip tied it to the metal frame of the seat. The purpose of this sensor is to either reduce the air bag charge, or turn the air bag off if the car is driven with the seat positioned all the way forward, being the seat lowering kit moves the seat all the way to the rear, the sensor will report the correct seat position. Also you will need to leave the pressure senor under the seat as-is.
*** All this information is a mute point though because you will be totally liable for the failure should you install this seat lowering kit. *** Â
(0 reviews)$332.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS144/155X Power Steering Pump Pulley & Bracket Combo
Gen 1 or 2 Viper Power Steering Pump Pulley & Bracket Combo
Power Steering Pump Pulley Replaces the Factory Plastic Pulley that will fail at some point with a Billet Aluminum Pulley. This Pulley utilizes a self locking hub design so no Pullers are required to install or remove the pulley hub on pump shaft.
This power steering pump bracket is CNC machined out of billet 6061-T6 (Heat Treated) aluminum, and replaces the factory die cast magnesium metal bracket that will fail at some point in time. So don’t be left stranded on the side of the road when it breaks!
(0 reviews)$241.00 – $246.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS147 Pantera Rear Deck Lid Shock Replacement Kit
Pantera Rear Deck Lid Shock Replacement Kits
This kit replaces the factory deck lid shocks that place stress on the rear deck lid causing damage and distortion to the fit of the deck lid to the body when closed. By moving the mounting location, this kit now applies the lifting force in-line with the deck lid so the pressure is not trying to bend the deck lid up. This kit also gets the shocks out of the way, so working in the engine bay just became easier. Another benefit of the new mounting geometry is the added weight of a wing on the deck lid is no longer a problem.
(1 review) -
Viper Parts
IPS150-Low Billet Transmission Cross Member 96-02 Vipers
Viper Billet Transmission Cross Member 96-02 Vipers Low cut Version for Polyurethane Mount
This one piece, billet cross member is designed to remove flex that the factory cross member can have. It improves shifting and overall chassis strength, while reducing unwanted vibrations. Machined from a solid block of aircraft 6061-T6 aluminum. Should also add the Polyurethane Mount option to get the best performance improvement.
(0 reviews) -
Viper Parts
IPS152 Solid Steering Rack Bushing 1992-2017 Vipers
Solid Steering Rack Bushing – 1992-2017 Dodge Viper
Replaces the stock rubber bushing with high strength CNC machined 6061 aircraft aluminum bushing. This will dramatically increase steering responsiveness, and reduce vibration that can be felt in the steering wheel.
(0 reviews) -
Viper Parts
IPS162X Rear Tow Hook Kits – 2003-2017 Vipers, Non ACR Extreme & GTS-R
Rear Tow Hook Kits, Gen 3,4 & 5 (2003-2017), Vipers, Non ACR Extreme & GTS-R
This Tow Hook kit is made from 1018 Steel, and Black Powder Coated. Bolts to the right or left rear frame rail with Grade 8 Hardware included.The complete kit installation can be done in less than 15 minutes.
(0 reviews)$70.00 – $141.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS164X – Viper Gen 4/5 Pedal Extension Kits
Pedal Extension Kit for 2008-2017 Vipers
The Gas Pedal kit moves the pedal 3/4″ toward the driver to improve the heel & toe position between the Throttle & Brake pedals.
The Brake & Clutch pedal Kits move the pedal 1 1/4″ toward the driver to make it easier to disengage the Clutch fully or makes pressing the Brake pedal easier if you can’t get enough adjustment with the factory pedal adjuster.
All Kits Take less than 15 minutes to install.
(0 reviews)$36.00 – $42.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS168 Replacement Wheel Centers
Replacement wheel centers CNC machined from aircraft 6061 – T6 Aluminum, available in polished plain domed, or black anodized with or without Logo. Center caps come with safety rings to insure they do not come out of the wheel.
(0 reviews)$188.00 – $223.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS173-GEN 1/2 Billet Pulleys 92-02 Vipers
Gen 1/2Â Billet Pulleys 92-02 Vipers
ALT Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley.
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Power Steering Pump Pulley
Replaces the Factory Plastic Pulley that will fail at some point. The replacement is made from Billet Aluminum. The Pulley utilizes a self-locking hub design so no Pullers are required to install or remove the pulley hub on pump shaft.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new 5/16 – 18 Grade 8 mounting hardware.
Water Pump Pulley 5.4″ Dia.
(0 reviews)$54.00 – $241.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS173-GEN 3 Billet Pulleys 03-06 Vipers
Gen 3Â Billet Pulleys 03-06 Vipers
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pullet with a replaceable Bearing.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new 5/16-18 Grade 8 mounting hardware.
(0 reviews)$72.00 – $185.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS173-GEN 4/5 Billet Pulleys 08-17 Vipers
Gen 4/5Â Billet Pulleys 08-17 Vipers
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pullet with a replaceable Bearing.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new M8 X 1.25 Grade 8 mounting hardware.
(0 reviews)$72.00 – $185.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS189 – Lug Nuts – Extended
Extended Lug Nuts to use with Spacer Plates
Custom lug nuts that extend into the wheel to gain back threads that were lost by adding spacer plates. 1/2-20 thread, 3/4 Hex. Available in Chrome or Black.Â
(MUST USE ANTI-SEIZE LUBRICANT or WD40 ON WHEEL STUDS TO HELP PREVENT THREAD GALLING (COLD WELDING OF THE THREADS)
Sold in Sets of 6
(0 reviews)$15.00 – $21.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS213 Pantera Seat Track Delrin Wheel Set
Delrin Seat Roller – Set of 8
This Rollers replace the stock plastic rollers and are made from high strength Delrin for long life and quiet operation
(0 reviews) -
Viper Parts
IPS220 Front & Rear Tow Hook Set – 1992-2002
GEN 1&2 Front & Rear Tow Hook Set
These tow hooks make it easy to trailer load your car, and for the racer, a tow point to get you out of the sand traps. Front tow hook mounts to existing bolts, and takes less than 10 minutes to install. The rear hook requires 2 holes to be drilled into the lower rear frame rail. Unlike other rear tow hook kits out there, this uses a sandwich design which will not collapse the frame rails due to no internal box support. Also the installation is easier because you are not trying to drill through two sides of the frame rail at an angle.
(0 reviews)$91.00 – $175.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS238 Pantera Gas Pedal
Billet Alum Gas Pedal
Machined from 6061-T6 Alum this this Billet gas pedal replaces the factory cast alum pedal which is prone to break due to it being a sand casting. The IPSCO Pedal also uses a bronze bushing for the pivot to improve pedal movement.
(1 review) -
Pantera Parts
IPS260-XX Billet Pantera Water Pump Pulleys
Pantera Water Pump Pulleys
These pulleys are machined from 6061-T6 Aluminum, which not only adds bling, but the weight is only one-third that of the factory steel pulley. The IPS260-OD is smaller in size, allowing the water pump to spin faster.
(0 reviews)$102.00 Select options This product has multiple variants. The options may be chosen on the product page