Your cart is currently empty!
IPS139-X Shift Knob adapter
This adapter can be used to allow the use of many after market knob available from your local auto part dealers. Make from 303 Stainless Steel adapts from 1/2″-20 Female therad to 1/2″-20 Male thread, with boot groove.
$39.00 – $42.00
In StockDescription
Shifter Knob Adapter
This adapter can be used to allow the use of many after market knob available from your local auto part dealers. Make from 303 Stainless Steel adapts from 1/2″-20 Female therad to 1/2″-20 Male thread, with boot groove.
IPS139 -1 (1 1/4″ Tall)
IPS139 -2 (2″ Tall)
IPS139 -3 (3″ Tall)
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 4 in |
| Lenght | 1 Inch, 2 Inches, 3 Inches |
You may also like…
-
Viper PartsIPS426 Short Throw Shifter 1992-2010 Vipers
The IPSCO Short Throw Shifter (STS), is designed to reduce the distance your hand needs to move to engage the next gear, thus reducing the amount of time spent shifting, reducing wasted time between shifts, and resulting in improved performance. We have decreased throw by reducing the angle that the shifter shaft travels through during its stroke between gears. IPSCO’s design changes the pivot point geometry of the short shifter from the stock factory shifter to reduce the distance that the upper section must travel to achieve the same degree of movement in the lower section where the shift rod engages. This ensures that although your hand is moving a shorter distance, the transmission is still fully engaged in every gear, and is carefully designed to create the optimal throw length, angular shift throw, and shift knob height. The design also includes springs to help users accurately move from gate to gate, to help prevent missed shifts and over revving of the engine on down shifts. The end result is a shorter, precise shift, which requires a shorter hand movement to engage the next gear, and looks and feels sportier.
(3 reviews)$410.00 Select options
Related products
-
Viper Parts
Front Removable Tow Hook Kits 2003-2010 Vipers
Front Removable Tow Hook Kit, 2003-2010, Gen 3/4 Vipers
This Tow Hook kit is made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car. Also available are SCCA approved (which does not stick out in front of the bumper fascia) and a flex ring versions.
Note: If you have an intercooler this Tow Hook will not fit.
(0 reviews)$198.00 – $230.00 Select options -
Viper Parts
IPS162X Rear Tow Hook Kits – 2003-2017 Vipers, Non ACR Extreme & GTS-R
Rear Tow Hook Kits, Gen 3,4 & 5 (2003-2017), Vipers, Non ACR Extreme & GTS-R
This Tow Hook kit is made from 1018 Steel, and Black Powder Coated. Bolts to the right or left rear frame rail with Grade 8 Hardware included.The complete kit installation can be done in less than 15 minutes.
(0 reviews)$70.00 – $141.00 Select options -
Viper Parts
IPS079X – GEN 2 Oil Pan Gate Kits
For Gen 2 Cars, this Gate kit helps keep oil in the pickup area of the pan during extreme braking, accelerating, and cornering. Two swing gates are added to keep the oil from leaving the pickup chamber. Design also allows oil flow back into the pan faster while keeping oil in the pickup chamber. You can also modify your pan to remove the oil dip stick pocket to allow all the oil to move freely.
(0 reviews)$271.00 Select options -
Viper Parts
IPS173-GEN 4/5 Billet Pulleys 08-17 Vipers
Gen 4/5 Billet Pulleys 08-17 Vipers
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pullet with a replaceable Bearing.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new M8 X 1.25 Grade 8 mounting hardware.
(0 reviews)$72.00 – $185.00 Select options
Reviews
There are no reviews yet.