Your cart is currently empty!
IPS30X-X Big Brake Bracket Kits – for GEN 2
SRT10 Caliper Mounting Kits – Front & Rear for GEN 2 Vipers (96-02)
Kit 1) IPS301 Big Brake Bracket kits for Front using SRT10 front caliper and SRT10 14″ front rotors. Includes mounting hardware. This kit is for Vipers with 18″,19″ & 20″ after market wheels, 18″ OEM wheels require 5/16″ thick wheel spacers and ET Lug nuts.
Kit 2) IPS302 Big Brake Bracket kits for Rear using SRT10 rear caliper and SRT10 14″ front rotors. Includes mounting hardware. This kit is for Vipers with 18″,19″ & 20″ after market wheels, 18″ OEM wheels require 5/16″ thick wheel spacers and ET Lug nuts.
Kit 3) IPS304 Big Brake bracket kit for Rear using Gen 2 Front calipers and Gen 2 13″ Front rotors on rear. Includes mounting hardware. This kit is for Vipers with 18″,19″ & 20″ OEM and after market wheels,
Calipers and Rotors not included.
$280.00
In StockDescription
Kit 1) IPS301 Big Brake Bracket kits for Front using SRT10 front caliper and SRT10 14″ front rotors. Includes mounting hardware. This kit is for Vipers with 18″,19″ & 20″ after market wheels, 18″ OEM wheels require 5/16″ thick wheel spacers and ET Lug nuts.
Kit 2) IPS302 Big Brake Bracket kits for Rear using SRT10 Rear caliper and SRT10 14″ front rotors. Includes mounting hardware. This kit is for Vipers with 18″,19″ & 20″ after market wheels, 18″ OEM wheels require 5/16″ thick wheel spacers and ET Lug nuts.
Kit 3) IPS304 Big Brake bracket kit for Rear using Gen 2 Front calipers and Gen 2 13″ Front rotors on rear. Includes mounting hardware. This kit is for Vipers with 18″,19″ & 20″ OEM and after market wheels,
Calipers and Rotors not included.
Additional information
| Weight | 4 lbs |
|---|---|
| Dimensions | 8 × 4 × 4 in |
| Generation | GEN 1 92-95, GEN 2 96-02 |
| Calipers Used | SRT Fronts, SRT Rears, GEN 2 Fronts |
Related products
-
Viper PartsIPS220 Front & Rear Tow Hook Set – 1992-2002
GEN 1&2 Front & Rear Tow Hook Set
These tow hooks make it easy to trailer load your car, and for the racer, a tow point to get you out of the sand traps. Front tow hook mounts to existing bolts, and takes less than 10 minutes to install. The rear hook requires 2 holes to be drilled into the lower rear frame rail. Unlike other rear tow hook kits out there, this uses a sandwich design which will not collapse the frame rails due to no internal box support. Also the installation is easier because you are not trying to drill through two sides of the frame rail at an angle.
(0 reviews)$91.00 – $175.00 Select options -
Viper Parts
IPS173-GEN 3 Billet Pulleys 03-06 Vipers
Gen 3Â Billet Pulleys 03-06 Vipers
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pullet with a replaceable Bearing.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new 5/16-18 Grade 8 mounting hardware.
(0 reviews)$72.00 – $185.00 Select options -
Viper Parts
Spring Seat Lowering Caps 1996-2017 Vipers
GEN 2/3/4 Spring Lowering Caps, 1996-2010 Vipers
These Spring Lowering Caps are made from 6061 Aircraft Aluminum. Low profile spring caps are an easy way to lower the ride height by .65″ to .75″ by replacing the thick OEM spring caps. Does not change the ride comfort while lowering the fender gap.
GEN 5 Spring Lowering Cap, 2013-2017 Vipers
These Spring Lowering Caps are made from 6061 Aircraft Aluminum. Low profile spring caps are an easy way to lower the ride height by .375″ to .5″ by replacing the thick OEM spring caps. Does not change the ride comfort while lowering the fender gap.
(0 reviews)$150.00 – $211.00 Select options -
Viper Parts
Front Removable Tow Hook Kits 2003-2010 Vipers
Front Removable Tow Hook Kit, 2003-2010, Gen 3/4 Vipers
This Tow Hook kit is made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car. Also available are SCCA approved (which does not stick out in front of the bumper fascia) and a flex ring versions.
Note: If you have an intercooler this Tow Hook will not fit.
(0 reviews)$198.00 – $230.00 Select options
Reviews
There are no reviews yet.