SRT Long Version Tow hook
Gen 3/4 SCCA Front Tow Hook
SRT Front Tow Hook Long Version
RING PLATE INSTALLED
Gen 5 Front Flex Tow Hook

Front Removable Tow Hook Kits 2003-2010 Vipers

Front Removable Tow Hook Kit, 2003-2010, Gen 3/4 Vipers

This Tow Hook kit is made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car. Also available are SCCA approved (which does not stick out in front of the bumper fascia) and a flex ring versions.

Note: If you have an intercooler this Tow Hook will not fit.

$198.00 – $230.00

In Stock
Share (1)
Total: 0 Total: 1
SKU: IPS161 Category: Tag:

Description

Front Removable Tow Hook Kit, 2003-2010, Gen 3,4 Vipers

This Tow Hook kit is made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car. Also available are SCCA approved (which does not stick out in front of the bumper fascia) and a flex ring versions.

Note: If you have an intercooler this Tow Hook will not fit.

IPS161 GEN 3 & 4 Installation Instructions for Front Tow Hook

Additional information

Weight 3 lbs
Dimensions 18 × 4 × 4 in
STYLE

SCCA, LONG, FLEX RING
COLOR

BLACK, SILVER, RED

Reviews

There are no reviews yet.

Be the first to review “Front Removable Tow Hook Kits 2003-2010 Vipers”

Your email address will not be published. Required fields are marked *

Related products

  • GEN2 Tow Hook Front & Rear
    Viper Parts

    IPS220 Front & Rear Tow Hook Set – 1992-2002

    GEN 1&2 Front & Rear Tow Hook Set

    These tow hooks make it easy to trailer load your car, and for the racer, a tow point to get you out of the sand traps. Front tow hook mounts to existing bolts, and takes less than 10 minutes to install. The rear hook requires 2 holes to be drilled into the lower rear frame rail. Unlike other rear tow hook kits out there, this uses a sandwich design which will not collapse the frame rails due to no internal box support. Also the installation is easier because you are not trying to drill through two sides of the frame rail at an angle.

    (0 reviews)
    $91.00 – $175.00 Select options This product has multiple variants. The options may be chosen on the product page
  • Delrin Diff Mount Bushing
    • Delrin Diff Mount Bushing
    • Delrin Diff Mount Bushing
    • Delrin Diff Bushing
    Viper Parts

    IPS445 Delrin Diff Mount Bushing

    Delrin Diff Mount Bushing  – 96-02  Vipers only

    Replaces the stock rubber bushing with high strength CNC machined Delrin bushing. This will dramatically  reduce vibration and help reduce rear wheel hop.

    (0 reviews)
    $205.00 Add to cart
  • Viper Wheel Spacers
    Viper Parts

    IPS111-XX Viper Billet Hub Centric Wheel Spacer w/o External Hub

    Viper 1/4″, 5/16″, & 3/8″ Thick Hub Centric Wheel Spacer – Fits all Dodge Vipers

    CNC machined from aircraft 6061-T6 Aluminum, available in 1/4, 5/16, & 3/8″ thick, 6 X 4.50 bolt pattern.

    All of our wheel spacers are hub centric, as they register on the bearing hub not the wheel studs. We have two versions of our wheel spacers ¼” to 3/8″ which are too thin to support an external hub, and a spacer that has an external hub. As the Viper has a bearing surface that the spacers or wheel ride on, that is 3/8″ long, you can see there is no way to have an external hub the same size as the internal bore needed to fit on the bearing hub on any spacer less than 3/8″. Our wheel spacers with the external hub start at .420″ thick and go up from there to insure there is enough material to support the wheel and not be knocked off due to a thin web between the internal bore and external hub.

    Sold as singles

    (1 review)
    $42.00 Select options This product has multiple variants. The options may be chosen on the product page
  • IPS079 Oil Pan Baffle Kit-longview
    • IPS079 Oil Pan Baffle Kit-longview
    • Modified windage Tray
    • Oil Pan Gate Kit
    Viper Parts

    IPS079X – GEN 2 Oil Pan Gate Kits

    For Gen 2 Cars, this Gate kit helps keep oil in the pickup area of the pan during extreme braking, accelerating, and cornering. Two swing gates are added to keep the oil from leaving the pickup chamber. Design also allows oil flow back into the pan faster while keeping oil in the pickup chamber. You can also modify your pan to remove the oil dip stick pocket to allow all the oil to move freely.

    This is a custom made part, lead time is one week.

    As with all custom made parts it is non-returnable.

     

    (0 reviews)
    $271.00 Select options This product has multiple variants. The options may be chosen on the product page