Your cart is currently empty!
IPS150-Low Billet Transmission Cross Member 96-02 Vipers
Viper Billet Transmission Cross Member 96-02 Vipers Low cut Version for Polyurethane Mount
This one piece, billet cross member is designed to remove flex that the factory cross member can have. It improves shifting and overall chassis strength, while reducing unwanted vibrations. Machined from a solid block of aircraft 6061-T6 aluminum. Should also add the Polyurethane Mount option to get the best performance improvement.
$102.00
In StockDescription
Viper Billet Transmission Cross Member 96-02 Vipers Low cut Version for Polyurethane Mount
This one piece, billet cross member is designed to remove flex that the factory cross member can have. It improves shifting and overall chassis strength, while reducing unwanted vibrations. Machined from a solid block of aircraft 6061-T6 aluminum. Should also add the Polyurethane Mount option to get the best performance improvement.
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 12 × 4 × 4 in |
Related products
-
Viper PartsIPS164X – Viper Gen 4/5 Pedal Extension Kits
Pedal Extension Kit for 2008-2017 Vipers
The Gas Pedal kit moves the pedal 3/4″ toward the driver to improve the heel & toe position between the Throttle & Brake pedals.
The Brake & Clutch pedal Kits move the pedal 1 1/4″ toward the driver to make it easier to disengage the Clutch fully or makes pressing the Brake pedal easier if you can’t get enough adjustment with the factory pedal adjuster.
All Kits Take less than 15 minutes to install.
(0 reviews)$36.00 – $42.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS143X Seat Lowering Kit Fixed 2″ – 03-10 Vipers
Seat Lowering Kit – Fixed 2″Â 03-10 Vipers
This fixed seat lowering kit lowers the 03-10 SRT seat a full 2 inches, allowing extra knee room and headroom for even the tallest Viper driver. The seat will no longer slide forward or backwards, but the seat back can be tilted.
This is a custom made part, lead time is one week.
2008-2010 owners *** IMPORTANT AIRBAG FACTS ***
Decision regarding seat lowering and air bag operation for both seats on 08-10 SRT10 Vipers.
Both passenger seats have a new system in the Viper that will correctly determine the weight of an occupant and adjust the airbag to on or off. It has some criteria to be met though as it is MUCH more advanced than any system has been before it.
Between 65 and 105 pounds the system will determine the need for the airbag at all. This will be based on a correctly seated person! This is true for all the levels of adjustment. You must sit in the seat correctly and distribute your weight evenly in the seat without leaning for/aft or side to side. Within seconds after starting the car the system will “lock in” your values. If this is not done correctly and the light is incorrect for your weight it is best to exit the running vehicle and wait 2-6 minutes before re entering the vehicle. At 2 minutes the corrected value is 80% and as the minutes increase to 6 minutes the corrected percentage gets closer to 100. The system also monitors and updates your weight and “position” in the vehicle every 2 minutes after that.
At 120+ pounds the airbag will still be monitored by the system but will be in the ON mode. It is still critical that your weight is evenly distributed though as it senses this every 2 minutes.
This all being said if you install the seat lowering kit you will need to do the following:
Both seats have a position sensor located under the seat, that controls the air bag by proximity to the steering wheel for force adjustment.
If the seat is lowered and the switch is not installed correctly the force of the airbag is unknown but it WILL still deploy if the conditions are met for it. The seat position sensor (a metal proximity sensor), will need to be adjacent to metal when the seat is from midway to the far back position, so you will need to zip tied it to the metal frame of the seat. The purpose of this sensor is to either reduce the air bag charge, or turn the air bag off if the car is driven with the seat positioned all the way forward, being the seat lowering kit moves the seat all the way to the rear, the sensor will report the correct seat position. Also you will need to leave the pressure senor under the seat as-is.
*** All this information is a mute point though because you will be totally liable for the failure should you install this seat lowering kit. *** Â
(0 reviews)$332.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
Billet Sway Bar Caps & Polyurethane Bushing Set
Billet Viper Front and Rear Sway Bar Caps & Polyurethane Bushing 1992-2017 Vipers
These brackets are CNC machined from billet 6061-T6 aluminum and anodized clear to give a long lasting protective finish. Supplied with ENERGY SUSPENSION’s performance polyurethane bushing, these bushings are impregnated with graphite to add a lubrication property to the bushings. Complete with a zerk fitting, which utilize a unique channel design to allow grease to flow to all inner bushing surfaces, virtually eliminating any possibility of squeaking.
SOLD as a Set of 2Â
(0 reviews)$103.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS152 Solid Steering Rack Bushing 1992-2017 Vipers
Solid Steering Rack Bushing – 1992-2017 Dodge Viper
Replaces the stock rubber bushing with high strength CNC machined 6061 aircraft aluminum bushing. This will dramatically increase steering responsiveness, and reduce vibration that can be felt in the steering wheel.
(0 reviews)
Reviews
There are no reviews yet.