Your cart is currently empty!
IPS079X – GEN 2 Oil Pan Gate Kits
For Gen 2 Cars, this Gate kit helps keep oil in the pickup area of the pan during extreme braking, accelerating, and cornering. Two swing gates are added to keep the oil from leaving the pickup chamber. Design also allows oil flow back into the pan faster while keeping oil in the pickup chamber. You can also modify your pan to remove the oil dip stick pocket to allow all the oil to move freely.
This is a custom made part, lead time is one week.
As with all custom made parts it is non-returnable.
$271.00
In StockDescription
For Gen 2 Cars, this Gate kit helps keep oil in the pickup area of the pan during extreme braking, accelerating, and cornering. Two swing gates are added to keep the oil from leaving the pickup chamber. Design also allows oil flow back into the pan faster while keeping oil in the pickup chamber. You can also modify your pan to remove the oil dip stick pocket to allow all the oil to move freely.
This is a custom made part, lead time is one week.
As with all custom made parts it is non-returnable.
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 22 × 10 × 4 in |
| Year | 96-99 (8.5 Qt. Pan), 00-02 (10 Qt. Pan) |
Related products
-
Viper PartsIPS112-X Viper Billet Hub Centric Wheel Spacer with External Hub
Viper .420 Thick Hub Centric Wheel Spacer with External Hub for wheel registration – Fits all Dodge Vipers
CNC machined from aircraft 6061-T6 Aluminum, available in .420″ thick, 6 X 4.50 bolt pattern.
All of our wheel spacers are hub centric, as they register on the bearing hub not the wheel studs. These wheel spacers have an external hub for registering the wheel on and insure there is enough material to support the wheel and not be knocked off due to a thin web between the internal bore and external hub.
Sold as singles, picture shows internal hub registration and external wheel registration
(0 reviews)$78.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
IPS173-GEN 1/2 Billet Pulleys 92-02 Vipers
Gen 1/2Â Billet Pulleys 92-02 Vipers
ALT Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley.
Idler Pulley
Replaces the Factory Steel Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Belt Tensioner Pulley
Replaces the Factory Plastic Tensioner Pulley with a Billet Aluminum Pulley with a replaceable Bearing.
Power Steering Pump Pulley
Replaces the Factory Plastic Pulley that will fail at some point. The replacement is made from Billet Aluminum. The Pulley utilizes a self-locking hub design so no Pullers are required to install or remove the pulley hub on pump shaft.
Under Drive Crank Pulley
Pulley is designed to turn water pump, Alternator, Power Steering pump, & AC 25% slower. This results is a 5-10HP gain and keeps the water pump from cavitation problems, and includes new 5/16 – 18 Grade 8 mounting hardware.
Water Pump Pulley 5.4″ Dia.
(0 reviews)$54.00 – $241.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
Front Tow Hook Kits – GEN 5 Vipers 2013-2017
GEN 5 Front Tow Hooks
The Front Tow Hook kits are made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car.
Front Fixed Ring Front Removable Tow Hook Kit – Design is a fixed Ring Plate
Front Flex Ring Front Removable Tow Hook Kit – Â design allows for the pulling force on the ring to adjust to the angle of the pull automatically.
(0 reviews)$241.00 – $271.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper Parts
Front Removable Tow Hook Kits 2003-2010 Vipers
Front Removable Tow Hook Kit, 2003-2010, Gen 3/4 Vipers
This Tow Hook kit is made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car. Also available are SCCA approved (which does not stick out in front of the bumper fascia) and a flex ring versions.
Note: If you have an intercooler this Tow Hook will not fit.
(0 reviews)$198.00 – $230.00 Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.