Description
Delrin Diff Mount Bushing
Replaces the stock rubber bushing with high strength CNC machined Delrin bushing. This will dramatically reduce vibration and help reduce rear wheel hop.
IPS445/446 Delrin Diff Mount Bushing
Delrin Diff Mount Bushing – 96-02 Vipers only
Replaces the stock rubber bushing with high strength CNC machined Delrin bushing. This will dramatically reduce vibration and help reduce rear wheel hop.
Price range: $215.00 through $385.00
In StockAdditional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 4 in |
| BUSHING TYPE | Front Bushing Set 445, Rear Bushing Set 446 |
Related products
-
Viper PartsIPS143X Seat Lowering Kit Fixed 2″ – 03-10 Vipers
Seat Lowering Kit – Fixed 2″ 03-10 Vipers
This fixed seat lowering kit lowers the 03-10 SRT seat a full 2 inches, allowing extra knee room and headroom for even the tallest Viper driver. The seat will no longer slide forward or backwards, but the seat back can be tilted.
This is a custom made part, lead time is one week.
2008-2010 owners *** IMPORTANT AIRBAG FACTS ***
Decision regarding seat lowering and air bag operation for both seats on 08-10 SRT10 Vipers.
Both passenger seats have a new system in the Viper that will correctly determine the weight of an occupant and adjust the airbag to on or off. It has some criteria to be met though as it is MUCH more advanced than any system has been before it.
Between 65 and 105 pounds the system will determine the need for the airbag at all. This will be based on a correctly seated person! This is true for all the levels of adjustment. You must sit in the seat correctly and distribute your weight evenly in the seat without leaning for/aft or side to side. Within seconds after starting the car the system will “lock in” your values. If this is not done correctly and the light is incorrect for your weight it is best to exit the running vehicle and wait 2-6 minutes before re entering the vehicle. At 2 minutes the corrected value is 80% and as the minutes increase to 6 minutes the corrected percentage gets closer to 100. The system also monitors and updates your weight and “position” in the vehicle every 2 minutes after that.
At 120+ pounds the airbag will still be monitored by the system but will be in the ON mode. It is still critical that your weight is evenly distributed though as it senses this every 2 minutes.
This all being said if you install the seat lowering kit you will need to do the following:
Both seats have a position sensor located under the seat, that controls the air bag by proximity to the steering wheel for force adjustment.
If the seat is lowered and the switch is not installed correctly the force of the airbag is unknown but it WILL still deploy if the conditions are met for it.The seat position sensor (a metal proximity sensor), will need to be adjacent to metal when the seat is from midway to the far back position, so you will need to zip tied it to the metal frame of the seat. The purpose of this sensor is to either reduce the air bag charge, or turn the air bag off if the car is driven with the seat positioned all the way forward, being the seat lowering kit moves the seat all the way to the rear, the sensor will report the correct seat position. Also you will need to leave the pressure senor under the seat as-is.
*** All this information is a mute point though because you will be totally liable for the failure should you install this seat lowering kit. ***
(0 reviews)$349.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper PartsIPS13X Shifter Knob Lowering Kit 92-17 Vipers
Viper Shifter Knob Lowering Kits
Direct bolt-in and will work with the stock factory knob, or an aftermarket shifter knob using 1/2-20 UNF threads. These lowering kits replace the factory black isolator and come in two versions 1″ or 2″ lowering kits.
Youtube Install Video : https://www.youtube.com/watch?v=VZHgzXROSEs Thanks to Life at Speed
(0 reviews)$43.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper PartsSpring Seat Lowering Caps 1996-2017 Vipers
GEN 2/3/4 Spring Lowering Caps, 1996-2010 Vipers
These Spring Lowering Caps are made from 6061 Aircraft Aluminum. Low profile spring caps are an easy way to lower the ride height by .65″ to .75″ by replacing the thick OEM spring caps. Does not change the ride comfort while lowering the fender gap.
GEN 5 Spring Lowering Cap, 2013-2017 Vipers
These Spring Lowering Caps are made from 6061 Aircraft Aluminum. Low profile spring caps are an easy way to lower the ride height by .375″ to .5″ by replacing the thick OEM spring caps. Does not change the ride comfort while lowering the fender gap.
(0 reviews)Price range: $163.00 through $227.00 Select options This product has multiple variants. The options may be chosen on the product page -
Viper PartsIPS154 Spare Tire Adapter
This adapter is Hub Centric and allows the use of the factory spare tire when after market big brake kits have been installed on the car. The larger caliper used in these kits will not clear the tire rim of the spare. Kit comes with mounting hardware.
** These are only available in natural aluminum finish, red is not an option.
(0 reviews)
Reviews
There are no reviews yet.