Shop
Showing 1–21 of 61 results
-
Corvette Parts (3)
-
Jeep Parts (1)
-
Pantera Parts (33)
-
Viper Parts (24)
-
Viper PartsBillet Sway Bar Caps & Polyurethane Bushing Set
Billet Viper Front and Rear Sway Bar Caps & Polyurethane Bushing 1992-2017 Vipers
These brackets are CNC machined from billet 6061-T6 aluminum and anodized clear to give a long lasting protective finish. Supplied with ENERGY SUSPENSION’s performance polyurethane bushing, these bushings are impregnated with graphite to add a lubrication property to the bushings. Complete with a zerk fitting, which utilize a unique channel design to allow grease to flow to all inner bushing surfaces, virtually eliminating any possibility of squeaking.
SOLD as a Set of 2
(0 reviews)$108.00 Select options This product has multiple variants. The options may be chosen on the product page -
Corvette PartsC8 DCT Park Release
C8 Corvette DCT Park Release tool is a must-have for all C8 owners. C8 Corvettes require the engine to be running to shift the car into neutral. If you have a dead battery or are out of gas this can prevent you from putting your corvette into neutral to allow rolling or towing trucks loading your car on to their flat bed without dollies. This tool solves this problem and does not require any wrenches to set the DCT in neutral.
Easy to release your corvette from park to allow movement
Built-in latch to hold the DCT in neutral for security
Bolt-on installation for permanent solution
Designed for the C8 Corvette, this tool provides safe transmission park release, making it a must have tool for all C8 corvette owners and mechanics. This ensures your C8 Corvette remains functional and free from being locked in park.
(0 reviews) -
Viper PartsFront Tow Hook Kits – GEN 5 Vipers 2013-2017
GEN 5 Front Tow Hooks
The Front Tow Hook kits are made from 6061-T6 Aluminum, and weighs only 2 LBS. Its design is stronger and distributes the load over a greater area unlike other steel versions on the market. The complete kit installs in less than 30 minutes, and when needed the Tow Ring can then be installed or removed in less than 2 minutes, so you don’t run into it when walking around the front of the car.
Front Fixed Ring Front Removable Tow Hook Kit – Design is a fixed Ring Plate
Front Flex Ring Front Removable Tow Hook Kit – design allows for the pulling force on the ring to adjust to the angle of the pull automatically.
(0 reviews)Price range: $253.00 through $285.00 Select options This product has multiple variants. The options may be chosen on the product page -
Corvette Parts
Front/Rear Removable Tow Hook C7 & C8 Corvette
Front & Rear Removable Tow Hooks for C7 & C8 Corvettes
These Tow Hooks are made with Stainless Steel main Shafts and the flex ring is made from 6061-T6 Aircraft Aluminum. Its design is stronger and distributes the load over a greater area unlike other versions on the market. These Tow Hooks install in the factory front or rear mount points in less than 5 minutes.
Compatible with C7 Corvette, Z51,Z06, Grand Sport, and ZR1 models, as well as all C8 Corvette models
Powder coated finish on the flex ring (Red, Black, or Silver)
Note: Does not fit C7 Stingrays made before 12/14/14 or non Z51 C7 Stingrays
(0 reviews)Price range: $115.00 through $250.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS001 Master Cylinder to Brake Booster Adapter
Master Cylinder to Brake Booster Adapter – This unit adapts a Wilwood Tandem Master Cylinders or Chrysler Type Master Cylinders, to the stock Pantera brake booster. Adapter is made from 6061 Aircraft quality aluminum with a bronze bushing, and a stainless steel push rod to give long life.
(0 reviews) -
Pantera PartsIPS002 Front Camber Lock Kit
Front Camber Lock Set – This set locks the upper ball joint in place after all alignment adjustment have been made. Made from Aircraft 6061 T-6 Aluminum.
(0 reviews) -
Pantera PartsIPS008-X Sway Bar Cap – w/ Engraved Detomaso Logo
Sway Bar Caps are CNC machined from 6061-T6 Aircraft Quality aluminum. These caps can be used on all 8 cap locations, 4 on the rear sway bar, and 4 on the front sway bar. For the best results these should be used on the four inner locations and use IPS092 Ball Caps on the outer four mounting points. The Logo is machined into the cap after the part is anodized to give a great contrast. They are available in Black and Clear anodize.
(Sold as Pair)
(0 reviews)$76.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS008I-XX Polyurethane Insert Grease-able
Sway Bar polyurethane Bushing 1″ to be used on IPS008 and IPS1175 products. These Bushing have channels molded inside for grease to minimize the squeaks that polyurethane is known for when they are dry.
(0 reviews)$21.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS024 Front Hood Grills
6061-T6 Billet Aluminum Front Hood Grills for Panteras. Replace your factory Plastic grills or add new grills to your Pantera. No more broken grill tips of the factory plastic due to a rock or towel catching the tip while drying your car. These grills are made from 6061-T6 Aluminum and powder coated .
(0 reviews)$454.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS032 Rotary AC Pump Bracket
AC Pump Mounting Bracket – Made from 6061 Aluminum . This bracket is used to mount Rotary AC pump.
(0 reviews) -
Pantera PartsIPS033 AC Rotary Pump / GM Alt Mounting Bracket
AC/ALT Mounting Bracket
Made from 6061 Aluminum . This bracket is used with Rotary AC pump and GM ALT. This bracket is used to relocate the ALT next to the AC pump so that the size of the engine cover can be reduced giving more room to the passenger seat.
(1 review) -
Pantera PartsIPS047 Pantera Lower Steering Column Bushing
Steering Column Lower Bushing
Bronze bushing to replace lower steering column factory plastic bushing.
(0 reviews) -
Pantera PartsIPS048-X Removable Rear Lower Cross Member
Removable Rear Lower Cross Member
This cross member can be removed so the oil pan can be removed and installed without lifting the motor.
Steel Version 2.5 Lbs
(0 reviews)$75.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS051 Water Restrictor Plate Modified / Thermostat Blockoff Plate – 351C Engine
Thermostat Block off Plate / Water Restrictor Plate Modified – 351C Engine
This block off plate is use to allow removal of the stock thermostat to help cooling.
(0 reviews) -
Pantera PartsIPS056 Pantera upper Steering Column Alignement Ring
Steering Column Upper Bearing Alinement Ring
Stainless Steel upper bearing alinement ring for the ball bearings in the top of the steering column.
(0 reviews) -
Viper PartsIPS079X – GEN 2 Oil Pan Gate Kits
For Gen 2 Cars, this Gate kit helps keep oil in the pickup area of the pan during extreme braking, accelerating, and cornering. Two swing gates are added to keep the oil from leaving the pickup chamber. Design also allows oil flow back into the pan faster while keeping oil in the pickup chamber. You can also modify your pan to remove the oil dip stick pocket to allow all the oil to move freely.
This is a custom made part, lead time is one week.
As with all custom made parts it is non-returnable.
(0 reviews)$285.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS092-XX Sway Bar Cap – Ball Style
Ball Caps are available in Black, or Clear Powder Coated. These Ball Caps are CNC machined from 6061-T6 billet aluminum, using a spherical design which allows the sway bar to move freely as the A-Arm moves through its Arc. Mounting hardware is included, and you have a choice of 20mm, 7/8″ or 1″ UHMW (Ultra-High Molecular Weight Polyethylene) Ball Insert.
(Sold as a Pair)
(0 reviews)$203.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS093 Pantera Aluminum Front Hub
Pantera Front Hub
CNC machined from 6061-T6 aluminum, designed for use with outside mounted Hat & Rotor and still give the stock location of the rotor. The hub has a 3.00″ Hat step for hat registration so the Rotor centers on the Hub not the wheel studs. Hubs have a screw on dust cap with O-ring to give a waterproof seal. Hubs are setup for factory press in studs.
(0 reviews)Price range: $27.00 through $350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS096 Rear Lower Pivot Shaft
Rear Lower Pivot Shaft
Replacement Pivot Shaft for Rear Upright, made from 12L14 Carbon Steel, with Precision Ground Finish to a tight-tolerance of +/-.0005″. Yield Strenght : 60,000 psi
(0 reviews) -
Pantera PartsIPS106 Pantera Rear Upright Lower Sleeve
Rear Upright Lower Sleeve
Rear Upright lower Sleeve Replacement, is made from Aircraft-Grade 4130 Alloy Steel. These sleeves have been made to the correct length. Therefore they do not need the two fill-in washers the factory used to make-up for the sleeves being to short.
(0 reviews) -
Pantera PartsIPS106B Pantera Rear Upright Lower Sleeve Bushing
Rear Upright Lower Sleeve Bronze Bushing
Rear Upright lower Sleeve Bushing Replacement, made from high strength bronze.
Sold as a Pair
(0 reviews)
