Your cart is currently empty!
Pantera Parts
Showing 1–21 of 31 results
-
Pantera PartsIPS001 Master Cylinder to Brake Booster Adapter
Master Cylinder to Brake Booster Adapter – This unit adapts a Wilwood Tandem Master Cylinders or Chrysler Type Master Cylinders, to the stock Pantera brake booster. Adapter is made from 6061 Aircraft quality aluminum with a bronze bushing, and a stainless steel push rod to give long life.Â
(0 reviews) -
Pantera PartsIPS002 Front Camber Lock Kit
Front Camber Lock Set –Â This set locks the upper ball joint in place after all alignment adjustment have been made. Made from Aircraft 6061 T-6 Aluminum.
(0 reviews) -
Pantera PartsIPS008-X Sway Bar Cap – w/ Engraved Detomaso Logo
Sway Bar Caps are CNC machined from 6061-T6 Aircraft Quality aluminum. These caps can be used on all 8 cap locations, 4 on the rear sway bar, and 4 on the front sway bar. For the best results these should be used on the four inner locations and use IPS092 Ball Caps on the outer four mounting points. The Logo is machined into the cap after the part is anodized to give a great contrast. They are available in Black and Clear anodize.
(Sold as Single Cap)
(0 reviews)$33.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera PartsIPS008I-XX Polyurethane Insert Grease-able
Sway Bar polyurethane Bushing 1″ to be used on IPS008Â and IPS1175 products. These Bushing have channels molded inside for grease to minimize the squeaks that polyurethane is known for when they are dry.
(0 reviews)$20.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS024 Front Hood Grills
6061-T6 Billet Aluminum Front Hood Grills for Panteras. Replace your factory Plastic grills or add new grills to your Pantera. No more broken grill tips of the factory plastic due to a rock or towel catching the tip while drying your car. These grills are maded from 6061-T6 Aluminum and powder coated .Â
(0 reviews)$431.00 – $454.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS032 Rotary AC Pump Bracket
AC Pump Mounting Bracket – Made from 6061 Aluminum . This bracket is used to mount Rotary AC pump.
(0 reviews) -
Pantera Parts
IPS033 AC Rotary Pump / GM Alt Mounting Bracket
AC/ALT Mounting Bracket
Made from 6061 Aluminum . This bracket is used with Rotary AC pump and GM ALT. This bracket is used to relocate the ALT next to the AC pump so that the size of the engine cover can be reduced giving more room to the passenger seat.
(0 reviews) -
Pantera Parts
IPS047 Pantera Lower Steering Column Bushing
Steering Column Lower Bushing
Bronze bushing to replace lower steering column factory plastic bushing.
(0 reviews) -
Pantera Parts
IPS048-X Removable Rear Lower Cross Member
Removable Rear Lower Cross Member
This cross member can be removed so the oil pan can be removed and installed without lifting the motor.
Steel Version 2.5 Lbs
Aluminum Version 1.5 Lbs
(0 reviews)$52.00 – $109.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS051 Water Restrictor Plate Modified / Thermostat Blockoff Plate – 351C Engine
Thermostat Block off Plate / Water Restrictor Plate Modified – 351C EngineÂ
This block off plate is use to allow removal of the stock thermostat to help cooling.
(0 reviews) -
Pantera Parts
IPS056 Pantera upper Steering Column Alignement Ring
Steering Column Upper Bearing Alinement Ring
Stainless Steel upper bearing alinement ring for the ball bearings in the top of the steering column.
(0 reviews) -
Pantera Parts
IPS092-XX Sway Bar Cap – Ball Style
Ball Caps are available in Black, or Clear Powder Coated. These Ball Caps are CNC machined from 6061-T6 billet aluminum, using a spherical design which allows the sway bar to move freely as the A-Arm moves through its Arc. Mounting hardware is included, and you have a choice of 3/4″, 7/8″ or 1″ UHMW (Ultra-High Molecular Weight Polyethylene) Ball Insert. Â
(Sold as a Pair)
(0 reviews)$193.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS096 Rear Lower Pivot Shaft
Rear Lower Pivot Shaft
Replacement Pivot Shaft for Rear Upright, made from 12L14 Carbon Steel, with Precision Ground Finish to a tight-tolerance of +/-.0005″. Yield Strenght : 60,000 psi
(0 reviews) -
Pantera Parts
IPS106 Pantera Rear Upright Lower Sleeve
Rear Upright Lower Sleeve
Rear Upright lower Sleeve Replacement, is made from Aircraft-Grade 4130 Alloy Steel. These sleeves have been made to the correct length. Therefore they do not need the two fill-in washers the factory used to make-up for the sleeves being to short.
(0 reviews) -
Pantera Parts
IPS106B Pantera Rear Upright Lower Sleeve Bushing
Rear Upright Lower Sleeve Bronze Bushing
Rear Upright lower Sleeve Bushing Replacement, made from high strength bronze.
Sold as a Pair
(0 reviews) -
Pantera Parts
IPS1175-X Pantera Rear Sway Bar Mount with Plaquer Plate
Pantera Rear Sway Bar Mount with Plaquer Plate
Sway Bar Mount is CNC machined from Aircraft 6061-T6 Aluminum. This design allows the Plaquer Plate to be mounted in front of the Sway Bar. Available in Black, and Clear anodized Finish as well as Natural Machined finish for polishing.
(2 reviews)$241.00 Select options This product has multiple variants. The options may be chosen on the product page -
Pantera Parts
IPS128 Pantera Steering Rack Bushing
Steering Rack Bushing
This bushing replaces the stock plastic sleeve on the passenger side of the steering rack. Made from Bronze for long life.
(0 reviews) -
Pantera Parts
IPS130 Billet ZF Lower Cover Plate
Billet ZF Cover Plate
CNC machined from 6061-T6 Aluminum, This plate is a direct replacement for the factory cast aluminum cover plate. So you can add a little dressed up look while adding a much stronger plate to reduce housing flex.
(0 reviews) -
Pantera Parts
IPS147 Pantera Rear Deck Lid Shock Replacement Kit
Pantera Rear Deck Lid Shock Replacement Kits
This kit replaces the factory deck lid shocks that place stress on the rear deck lid causing damage and distortion to the fit of the deck lid to the body when closed. By moving the mounting location, this kit now applies the lifting force in-line with the deck lid so the pressure is not trying to bend the deck lid up. This kit also gets the shocks out of the way, so working in the engine bay just became easier. Another benefit of the new mounting geometry is the added weight of a wing on the deck lid is no longer a problem.
(1 review) -
Pantera Parts
IPS213 Pantera Seat Track Delrin Wheel Set
Delrin Seat Roller – Set of 8
This Rollers replace the stock plastic rollers and are made from high strength Delrin for long life and quiet operation
(0 reviews) -
Pantera Parts
IPS238 Pantera Gas Pedal
Billet Alum Gas Pedal
Machined from 6061-T6 Alum this this Billet gas pedal replaces the factory cast alum pedal which is prone to break due to it being a sand casting. The IPSCO Pedal also uses a bronze bushing for the pivot to improve pedal movement.
(1 review)
